影音先锋美女中文字幕爱情网视频,欧美国产日韩五月丁香久久综合,欧美日本大片一区二区福利片,久久精品女同一区二区

德國 Kirchgaesser公司一直致力于研發、制造高質量的用于采礦及其他工業領域的防爆測量裝置，產品具有極高的精度和可靠性，使用壽命長，免維護，尤其在極端苛刻的工況中占據著歐洲主要的市場份額。 具體產品有流量傳感器，壓力傳感器，溫度傳感器，液位傳感器以及微波探測器及光柵等。

諾希德優勢提供德國Kirchgaesser傳感器、微波探測器、微波發射器、微波接收器、微波放大器、微粒測量儀、微波接收發射器、礦用流量計、限位開關、信號放大器、流量計、溫度計、液位計、物位計、測量系統、檢測器 監控儀、、、。詳情請聯系我公司。  

DEUBLIN 旋轉接頭 serial NO.73751；7100-852. M451760

ISMET 變壓器 pri 230V sec 0-230/260V sec 25,0A

SIPOS 電源板 2SY50-LY1004

SIPOS 控制板 2SY50-LY1601

BALLUFF 開關 BES516-300-S135-S4-D

PLZZATO 開關  FR530-K70

SIRAI 電磁閥 Z130A

BOWMAN 冷卻器 ec16014255

VISOLUX 光電檢測器 MLV40-8-H-1463

DURAG 點火系統高壓電路板 DHG 400 EX

RADIO-ENERGIE 測速電機 0444r1b 0.06eg 11*30

FLOVEX 油換熱器 BEN 602-B-4

ITT-FLYGT 泵 3102.180 (IS) 3.1 Kw

ONO SOKKI 編碼器 RP-132A-TO

KROHNE 電磁流量計 DN 200

CHAUVIN ARNOUX 電阻測試計 CA6415

SONY 磁柵尺 SR128-185

GOTEC 泵 EMX08-T/C,24V,18W，150HZ

FLOVEX 熱交換設備 BEM/S 805-A-2

GEM-SOL 電磁閥 GEM-B-31 24V 50HZ 8W

SARAI 電磁閥 L145R2-Z614A 24VAC

MEISTER 流量開關 DKM-1/90

ELECTROCRAFT 馬達 E39AFG-3C

MAYSER 控制器 EIN 42A 42V

TRAFAG 壓力開關 型號：988.42

SIRSI 蒸汽電磁閥 L145RZ Z614A 24V AC

BOWMAN 油冷卻器 FG120

VIPA 數字量輸入模塊 VIPA-322-1BL00

VIPA 數字量輸入模塊 VIPA-331-7KF01

VSE 流量計 VS 0，1 EPO 12V-32N11/4

VSE 流量計 VS 0，1 EPO 12V-32Q11/4

Universal Hydraulik PVQ-PSAO-08HRUH PVQ-PSAO-08HR

Universal Hydraulik 螺桿泵 SSPH-3/13

Universal Hydraulik 螺桿泵 SSPH-3/19

WIKA 壓力表 111.1

WIKA 壓力表 232.5

VICKERS 比例閥 KFDG4V 3 33C20N ZM U1 H7 20

VISOLUX 膠水檢測 ML4-8-KSU/43/70A 10～30VDC J 144227

DANFOSS SOCLA 閥門 DN100 FN-CJL-250

EUGEN SEITZ 電磁閥 EUGEN SEITZ AG8623 wetzikon Switzerland ****15  330  00 F.NO.9209  5-40BAR Medium Luft

Magnetic-inductive flow meter

		MIDEX Digital local display Max. 8 signal outputs e.g. frequency 5 - 15 Hz Refrigeration capacity measurement (up to 20,000 kW) Nominal width: DN50 to DN300 Nominal pressure: PN10 to PN500 Measuring range: max. 2000 m3/h and 1000 l/min respectively
		MIKRO-/MINIMIDEX-A with MXR Evaluation unit with remote transducer Max. 2 signal outputs e.g. frequency 5 - 15 Hz Nominal width: DN10 to DN31 Nominal pressure: PN100 to PN500 Measuring range: max. 800 l/min
		MID-EX-E Compact and robust flow meter with optional integrated pressure measurement Replaces older flow meters MIKRO-/MINIMIDEX-E/-E2 Signal outputs: frequency, limit, current or voltage Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to DN31 Nominal pressure: PN100 to PN500 Measuring range: max. 400 l/min and 400 bar respectively
		MID-EX-C Compact and robust flow transducer for small flow rate to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to DN31 Nominal pressure: PN100 to PN500 Measuring range: max. 400 l/min and 400 bar respectively
		MID-EX-GC Compact and robust flow transducer for high flow rate to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Nominal width: DN50 to DN300, optional with high pressure couplings Nominal pressure: PN10 to PN160 Measuring range: max. 1000 l/min and 2000 m3/h respectively
		MULTIMIDEX Compact four channel flow meter Signal outputs: frequency, serial, CAN Nominal width: DN12 Nominal pressure: PN100 Measuring range: 0 - 50 l/min

Pressure meter

		PEMEX-E Digital local display Max. 2 output signals (frequency 5 - 15 Hz, limit) Measuring range: max. 1000 bar Process connection, sensor: - Pipe thread G1?, flush-mounted ceramic sensor or - Pipe thread G?, internal ceramic sensor or - Pipe thread G?, flush-mounted thinfilm sensor or - Pipe thread G?, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
		PEMEX-LC Compact pressure meter Output signal: - Frequency 5 - 15 Hz or - Voltage 1 - 5 V or 1 - 10 V Measuring ranges: Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) Process connection, sensor: - Pipe thread G1?, flush-mounted ceramic sensor or - Pipe thread G?, internal ceramic sensor or - Pipe thread G?, flush-mounted thinfilm sensor or - Pipe thread G?, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
		PEM-EX-C Compact pressure transducer for connection to a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring ranges: Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) Process connection, sensor: - Pipe thread G1?, flush-mounted ceramic sensor or - Pipe thread G?, internal ceramic sensor or - Pipe thread G?, flush-mounted thinfilm sensor or - Pipe thread G?, internal thinfilm sensor or - Pipe thread G?, internal thinfilm sensor or - Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor

Temperature meter

		TEMEX Digital local display Max. 2 output signals (frequency 5 - 15 Hz, limit) Measuring range: -20°C to +70°C (quartz sensor) or -20°C to +150°C (semiconductor sensor) Various programmable functions like: - Limit detection - Simulation of measuring value - Error diagnosis
			TEM-EX-C Compact temperature transducer for connection to a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring range: Selectable in the range of -20°C to +150°C acc. to the table of versions (other measuring ranges are available on request) Process connection: - Thread G? - Selectable length of sensor

Level meter

		RASOMEX Measuring principle: Radar Output signal: - Frequency 5 - 15 Hz or - Current 4 - 20 mA or - Voltage 0.4 - 2.0 V or - Voltage 1 - 5 V or - Voltage 1 - 10 V and - Alarm output (potential-free optocoupler) Measuring range: max. 70 m Microprocessor-controlled evaluation unit RASOMEX-S with remote display and operation unit RASOMEX-A
		UMINEX Measuring principle: Ultrasonic Output signal: - Frequency 5 - 15 Hz - Max. 3 programmable relay outputs Evaluation unit with LC-display Measuring range: max. 3 m for solids and 8 m for liquids
		PEMEX-BS Mobile evaluation unit PEMEX-BSA with remote transducer PEMEX-BSS Level measuring in pressureless (deep) springs or in water towers Measuring range: 0 - 10 m to 0 - 250 m Max. cable length of transducer: 2000 m Microprocessor-controlled evaluation unit with following features: - Memory for up to 35 measuring values - Power supply with (rechargeable) batteries (4x type AA) - Internal LC-display - Serial interface to transfer measuring values to PC - Software to transfer measuring values to Microsoft Excel®
		ULTRAMEX This measuring device was replaced by the new level meter RASOMEX.

Magnetic-inductive flow monitor

FLUWEX-A with MXR Digital local display Max. 2 signal outputs (e.g. frequency 5 - 15 Hz) Measuring range: 0 - 5 m/s Extensive functionality like - Limit generation - Simulation of the measuring value - Error diagnosis

Particle meter

PARTIMEX Digital local display Output signal: - Frequency 5 - 15 Hz, - Current 4 - 20 mA or - Voltage 0.4 - 2.0 V and - Max. three programmable optocoupler outputs Measuring range (level of intensity): 10 to 100 (detection of particles < 5 μm) Wide functionality like - Limit detection - Simulation of measuring values - Remote diagnosis

Microwave barrier

SOLWEX20 Features: - LED field strength display - Selectable pull-in/drop-out delay - Current monitoring of emitter/receiver Output signals: - 3 optocoupler outputs (switching and alarm) - Max. 2 optional relay outputs (change-over contact) Detection range: max. 20 m

Control systems

AQUACONEX Cooling water control for up to two motor circuits Signal outputs: Frequency 5 - 15 Hz, pulse or limit (programmable) and one relay contact (change-over switch) Measuring range: 0 - 30 l/min (per circuit) Different maintenance and cleaning facilities

Microwave barrier

		FDR50/FQR50 Contact-free detection of all types of bulk solids Suitable as level limit switch and for counting bulk solids Detection range: max. 20 m Process connection: - Thread R1? (EN 10226) or - Thread 1? NPT (ANSI/ASME B1.20.1) Conforms to: - ATEX II 1/2D - ATEX II 1/2GD - IECEx
		Switching amplifier FTR325 1-channel switching amplifier for the microwave barrier FDR50/FQR50 High level of operational safety through line monitoring up to the sensor LED display of operating and switching state Selectable pick up and/or drop out delay of the switching output Compact housing for easy inline mounting on standard rack rails

Level meter

		FMM50 Electromechanical level measuring system for heavy-weight grained bulk solids and for liquids Traction power: max. 500 N Output signal: - Current 0/4 - 20 mA and - Max. 6 programmable relays Measuring range: max. 70 m Power supply: 180 - 253 VAC, 50/60 Hz or 90 - 127 VAC, 50/60 Hz Optional design with certification for applications in areas subject to dust explosion hazard zones 20, 21 and 22, category 1/2D
			FMM20 Electromechanical level measuring system for lightweight grained bulk solids and for liquids Traction power: max. 150 N Output signal: - Current 0/4 - 20 mA and - Max. 4 programmable relays Measuring range: max. 32 m Power supply: 90 - 253 VAC, 50/60 Hz or 20 - 28 VDC Optional design with certification for applications in areas subject to dust explosion hazard zones 20, 21 and 22, category 1/2D

 

		COMBA-EX Evaluation and display unit for up to 4 transducers Possible transducers: - PEM-EX-C (pressure) and/or - TEM-EX-C (temperature) and/or - MID-EX-C (small flow) and/or - MID-EX-GC (high flow) Automatical detection of the connected transducers (type and measuring range) Output signal: Frequency 5 - 15 Hz No parameterizing or programming required Maintenance-free
			MID-EX-C Compact small flow transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring range: max. 400 l/min Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to DN31 Nominal pressure: PN100 to PN500
				MID-EX-GC Compact high flow transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring range: max. 1000 l/min and 2000 m3/h respectively Nominal width: DN50 to DN300, optional with high pressure couplings Nominal pressure: PN10 to PN160
					PEM-EX-C Compact pressure transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring ranges: Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table of versions (other measuring ranges are available on request) Various process connections
						TEM-EX-C Compact temperature transducer to connect with a Kirchgaesser evaluation and/or display unit or signal converter respectively Measuring ranges: Selectable in the range of -20°C to +150°C acc. to the table of versions (other measuring ranges are available on request) Process connection: - Thread G? - Selectable length of sensor

微波接收發射器（微波探測器）：型號： FQR50 / FDR50
功能特點：

l         可以對所有散裝固體材料進行非接觸式、無磨損式檢測

l         微波探測器在測量過程中采用的是非接觸式方法，因此可以安裝在集裝箱，排水管道或者礦井里面。微波可以從外部穿透非金屬材質進行測量。

l         可以用作限位開關來對所有散料進行控制和測算。主要包括：木屑，面粉，石膏，水泥，紙屑，紙板碎片，砂礫，沙子，有干燥粉塵，包裝袋，包裝盒。

l         前端平齊，非接觸式裝置

l         機械材質堅固，無磨損，壽命長，無需維護

l         對接收器上的信號強度進行指示

l         靈敏度可以人工調節

l         使用 R 11/2- or 11/2" NPT- 螺紋即可簡單安裝

    

德國KI Kirchgaesser 公司 產品有：

流量計：MIDEX  MIKRO  MINIMIDEX  MID-EX-C  MID-EX-E  MID-EX-GC  MULTIMIDEX  FLUWEX-A  系列

壓力和溫度傳感器：PEMEX-E   PEMEX-LC   PEM-EX-C  TEMEX  TEM-EX-C   系列

液位傳感器：FMM20  FMM50  PEMEX-BS  UMINEX   RASOMEX  系列

微波探測器及其他: SOLWEX20  FDR50  FQR50  PARTIMEX  COMBA-EX  FTR325系列

德國KIRCHGAESSER礦用流量計，壓力傳感器，溫度傳感器，液位計，微波柵，微波接收發射器.
型號包括： FDR50，FQR50，FTR325，MIDEX，MIKROMIDEX，MINIMIDEX，MIDEX-E，MULTIMIDEX，PEMEX-E，PEMEX-LC，PEMEX-C，TEMEX，RASOMEX，UMINEX，PEMEX-BS， FLUMEX-A，PARTIMEX，SOLWEX20，SYMEX，AQUACONEX，COMBA-EX，FMM50，FMM20
德國KIRCHGAESSER微波（料位計）接收發射器功能特點：
1,可以對所有散裝固體材料進行非接觸式、無磨損式檢測
2,微波探測器在測量過程中采用的是非接觸式方法，因此可以安裝在集裝箱，排水管道或者礦井里面。微波可以從外部穿透非金屬材質進行測量。
3,可以用作限位開關來對所有散料進行控制和測算。主要包括：木屑，面粉，石膏，水泥，紙屑，紙板碎片，砂礫，沙子，所有干燥粉塵，包裝袋，包裝盒。
4,前端平齊，非接觸式裝置
5,機械材質堅固，無磨損，壽命長，無需維護
6,對接收器上的信號強度進行指示
7,靈敏度可以人工調節
8,使用 R 11/2- or 11/2＂ NPT- 螺紋即可簡單安裝
德國KIRCHGAESSER礦用流量計，KIRCHGAESSER壓力傳感器，KIRCHGAESSER溫度傳感器，KIRCHGAESSER液位計，KIRCHGAESSER微波柵，KIRCHGAESSER微波接收發射器.